The radio will automatically exit the status/message feature. Four beeps will sound to indicate that the status or message has been received. When the display shows the desired status or message, press the select key (13) to transmit the status or message. Use the mode selector (D) to scroll through the lists of possible statuses or messages. The last acknowledged status or the first message will be displayed. Select the menu STATUS or MESSAGE as previously described. The call is then handled as described under “ Sending a Telephone Call” above. (3) or the telephone interconnect button (7) to hang up.) Now press the select button (13) or the PTT (F). (If no dial tone sounds, press the HOME button Press the select button (13) if the scan icon is not in the display, to include the mode as a normal priority member. Use the mode selector (D) to select the desired mode. The programming icon and the triangle in the display flash. Select the menu PROGRAM LISTS as previously described, then use the mode selector (D) until SCAN is displayed and press the select button (13) or Press and hold the scan button (8) until the key press accepted tone is heard.
If a scan list is user programmable, it may be changed by the user (members added or deleted). The function is left by pressing the HOME button (3). Use the mode selector (D) to view the next member. The programming icon will be on while the list is viewed. The dot in the scan icon flashes if the mode is priority 1, lights continuously if the mode is priority 2 or the icon lights continuously to indicate a normal priority mode. Select the menu VIEW LISTS as previously described, then use the mode selector (D) to display the menu SCAN. Warning: When installing or removing the mobile radio from the vehicle, the radio must be switched off or damage to the radio may occur. 18Ĭaution: Vehicles Equipped With Air Bags. Stat Alert (MDC-1200/Star Signalling) Features. 9 Sending a Private Call (trunking only). 8 Keypad Selection (List/Buffered Dialing).
0 kommentar(er)
